FOD CAN HOLDER

VERSATILE ... STURDY ... CONVENIENT

Why strap coffee cans onto poles and pray they don't blow away in a jet blast? Now you can deploy this versatile FOD collection, containment and disposal system to multiple outdoor locations on the airside and keep your peace of mind intact.


Front view of the FCH-100 mounting a five-gallon FODCAN directly to a jet bridge stairway railing cross-beam.

Mount the FODCAN Holder (part number FCH-100) to:

• Any horizontal or vertical square or round tubing up to two-and-three-eights inches outside diameter
• Any parking lot bollards (safety posts) up to four-and-a-half inches outside diameter
• Any flat surface that can be drilled

Rear view of the FCH-100 bolted directly onto the cross-beam.

Durable, long-lasting construction:

• Can remain outdoors continuously 24 / 7 / 365
• Sturdy carbon-steel materials
• Always looks great with a high-quality powder coating finish

Front and rear view of the FHC-100 attached to a guard railing. Note how it sits perpendicular to a horizontal railing yet remains secure in position. (For attachment to square tubing, use square u-bolts.)

Included five-gallon plastic FODCAN (part number FC-5P):

• Convenient snap-shut hinged lid keeps FOD in and weather out
• Stays secure against wind or jet blast via top red cross-bar
• Detaches quickly from the FCH-100 for easy disposal of collected debris
• One FODCAN included with each FCH-100
  

(L) Side view of the FCH-100. (R) Rear view of the integrated mounting face with its selection of pre-drilled mounting holes that mount easily to a variety of surfaces.

Please note: due to the many potential mount shapes and locations with variations in required hardware, we do not supply mounting hardware. However, we do supply mounting hardware for the FCHB-90 (see below).

Optional 90-degree Mounting Bracket (part number FCHB-90):

• Installs the FCH-100 perpendicular to an attachment location such as jet-bridge stairway hand rails
• Which keeps it at a complimentary angle and looking proper when the jet-bridge stairs are raised or lowered
• And reduces the distance the whole assembly extends into the work area
• Mounting hardware for the FCHB-90 included
  

At upper left see the optional 90-Degree Mounting Bracket. In middle, see the red "top cross bar" that secures the white FODCAN in place. To free a full FODCAN for dumping, just lift that cross bar. Note the the 90 degree mounting bracket that allows parallel attachment to a pipe or rail.

When inquiring, reference these part numbers:

• FCH-100 (FODCAN Holder)
• FC-5P (Five-Gallon Plastic FODCAN)
  
• FCHB-90 (Optional 90-Degree Mounting Bracket)

No maintenance required! Bolt it in place, use it and forget it.

Proudly made right here in the USA!

Or, if you require FOD containers for indoor usage, learn more about our complementary line of OSHA-approved floor and bench FOD Cans.

Just shoot us an email or call one of the phone numbers listed below and we'll be happy to talk details.

    EMAIL THIS PAGE TO A FRIEND

..

Copyright 2001-2010 The F.O.D. Control Corporation. "FODBuster", "Only You Can Prevent Foreign Object Damage" and the Bust Fod logo are registered trademarks of the F.O.D. Control Corporation. All rights reserved.

.

---

.

Call toll free or email us at info@fodcontrol.com for current price, warranty and ordering information. Toll free phone: 1 - 800 - 425 - 8363 - International phone: 1 - 520 - 760 - 7732 - Fax: 1 - 520 - 760 - 7734. Customer Service hours are 8 a.m. to 5 p.m. Pacific Standard Time zone, USA. For U.S. Military Purchases: Sample Form DD1348-6 local purchase requisitions and corresponding specifications attachments are available. We welcome US Government Credit Cards, Visa, MasterCard or American Express.